DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS!
No soldering required! This is a 635nm Mitsubishi ML520G71 diode pressed into a standard diode module, and soldered to a 1A current regulated driver circuit that has been installed in a C6-style host "pill". Solder junctions have heat shrink tubing applied, lead wire is silicone insulated. All modules are tested for function and performance, minimum output power is 450 +/- 50mW with a standard AR coated acrylic lens and 2 fully-charged RCR123A batteries. This module can be used with P/N SL-SLS4LHA Survival Laser S4 Laser Host Assembly with the red anodized heat sink option and the SL-SLSS2LHA Survival Laser Stainless Steel Laser Host Assembly, Extended and Tapered Heat Sink. Module is packaged in an anti-static bubble bag. Note: The beam divergence on these diodes is significantly higher than most other laser diodes due to the specific design and configuration of the diode emitter.