DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS!
No soldering required! This diode and driver module includes a 9mm 445nm diode pressed into a copper diode module and soldered to a 2.2A current regulated driver circuit that has been installed in a C6-style host "pill". Solder junctions have heat shrink tubing applied, lead wire is silicone insulated. All modules are tested for function and performance, minimum optical output power is 2,800 +/- 200mW with a G-1 or G-2 lens and 2 fully charged RCR123A batteries. Actual measured output is written on the pill. This module can be used with P/N SL-SLS4LHA Survival Laser S4 Laser Host Assembly with the extended and tapered copper heat sink option, and the P/N SL-SLSS2LHA Survival Laser Stainless Steel Laser Host Assembly, Extended and Tapered Heat Sink. Module is packaged in an anti-static bubble bag. Note: Use of an extended and tapered copper heat sink is required with this module.