DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS!
No soldering required! This is a 445nm diode pressed into a standard diode module (copper module option available) and soldered to a 1.5A current regulated driver circuit that has been installed in a C6-style host "pill". Solder junctions have heat shrink tubing applied, lead wire is silicone insulated. Diodes are binned and all modules are tested for function and performance, minimum optical output power is 1,400 +/- 100mW with a standard AR coated glass lens and 2 fully charged RCR123A batteries. Actual measured output is written on the pill. This module can be used with P/N SL-SLS4LHA Survival Laser S4 Laser Host Assembly with the copper heat sink option, and the P/N SL-SLSS2LHA Survival Laser Stainless Steel Laser Host Assembly, Extended and Tapered Heat Sink. Module is packaged in an anti-static bubble bag. Note: Lead wire appearance may be different than that shown. Use of a copper heat sink is strongly recommended with this module.