About

 

Survival Laser, Inc. sells high-power handheld 405nm violet, 445nm & 462nm blue, 520nm green and 635nm & 660nm red lasers, laser parts and laser accessories for all-weather firestarting, emergency signaling, aquarium pest control, educational, research, pyrotechnic material ignition and other applications.


Survival Laser was launched in 2010 by Gary Rosenfield in Cedar City, Utah. Gary has a long time interest in high tech devices including lasers. His fascination with lasers began in 1966 with the publication of the article "The Laser's Bright Magic" in the December issue of National Geographic magazine. In 1973 he constructed an Argon-ion gas laser that won 2nd place in the Orange County, CA science fair. Also around that time he and high school friend Gene Gibbs were making laser holograms in the basement of the Gibbs family cabin in Lake Arrowhead, CA.


L-R: Gary Rosenfield, Franklin "Gene" Gibbs and Gary Leacock during a test filling of the Argon laser tube with gas.

Gary is also 
a bona-fide "rocket scientist" and develops propellant formulations and rocket motor designs for the AeroTech Consumer Aerospace Division of RCS Rocket Motor Components, Inc., and his attention to engineering detail is embodied in the Survival Laser products, bringing you some of the highest quality and most powerful handheld laser components available today.



Product Specifications (assembled)

Survival Laser GX 520nm (Green) Specifications
Part numbers: SL-GXPB/PBAR
Wavelength: 520nm (bright green)
Power output: 1.1W (1,100mW) +/- 100mW with single-element G-2 glass lens
Beam shape: Rectangular
Beam width: 5mm
Divergence: ~2.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 2.2A
Lens: High efficiency G-2 single-element glass lens, focusable
Heat sink: Extended and tapered copper
Duty cycle: 45 seconds on, 2 minutes off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 127 grams (4.5 oz)
Weight w/batteries: 159 grams (5.6 oz)
Total run time: Up to 20 minutes (45 minutes with 18650 batteries)

Survival Laser I 445nm (Blue) Specifications

Part numbers: SL-001PB/PBAR
Wavelength: 445nm (indigo blue)
Power output: 1,100mW +/- 100mW (with standard lens)
Beam shape: Rectangular
Beam width: 5mm
Divergence: <2.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X CR123A or RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 1.20-1.25A
Lens: AR coated 3-element glass, focusable
Heat sink: Blue anodized aluminum (copper upgrade available)
Duty cycle: 1 minute on/off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 74 grams (2.6 oz) Weight w/batteries 107 grams (3.8 oz)
Total run time: Up to 1 hour per charge

Survival Laser I.4 445nm (Blue) Specifications
Part numbers: SL-001.4PB/PBAR
Wavelength: 445nm (indigo blue)
Power output: 1,400mW +/- 100mW (with standard lens)
Beam shape: Rectangular
Beam width: 5mm
Divergence: <2.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 1.25-1.50A, depending on diode efficiency
Lens: AR coated 3-element glass, focusable
Heat sink: Copper
Duty cycle: 1 minute on/off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 104 grams (3.7 oz)
Weight w/batteries: 137 grams (4.8 oz)
Total run time: Up to 45 minutes per charge

Survival Laser II & SL II SE 445nm (Blue) Specifications
Part numbers: SL-002PB/PBAR, SL-002SEPB/PBAR
Wavelength: 445nm (indigo blue)
Power output: 1.8W (1,800mW) standard, 2.2W (2,200mW) SE +/- 100mW (both with G-2 lens)
Beam shape: Rectangular
Beam width: 5mm
Divergence: ~2.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 1.75-1.80A
Lens: High efficiency G-2 single-element lens, focusable
Heat sink: Extended length copper
Duty cycle: 1 minute on, 2 minutes off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 114 grams (4.0 oz)
Weight w/batteries: 150 grams (5.3 oz)
Total run time: Up to 30 minutes (1 hour with 18650 batteries)

Survival Laser III 445nm (Blue) Specifications
Part numbers: SL-003PB/PBAR
Wavelength: 445nm (indigo blue)
Power output: 2.8W (2,800mW) +/- 200mW with single-element G-2 glass lens
Beam shape: Rectangular
Beam width: 5mm
Divergence: ~2.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 2.2A
Lens: High efficiency G-2 single-element glass lens, focusable
Heat sink: Extended and tapered copper
Duty cycle: 45 seconds on, 2 minutes off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 127 grams (4.5 oz)
Weight w/batteries: 159 grams (5.6 oz)
Total run time: Up to 20 minutes (45 minutes with 18650 batteries)

Survival Laser 5 445nm (Blue) Specifications
Part numbers: SL-005PB/PBAR
Wavelength: 445nm (indigo blue)
Power output: 4.5W (4,500mW) +/- 500mW with single-element G-2 glass lens
Beam shape: Rectangular
Beam width: 5mm
Divergence: ~3.0mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X 16340 or 18350 IMR batteries (2 X 18650 IMR batteries with optional extension tube)
Driver current: 3.0A
Lens: High efficiency G-2 single-element glass lens, focusable
Heat sink: Extended and tapered copper
Duty cycle: 20 seconds on, 1 minute off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 127 grams (4.5 oz)
Weight w/batteries: 159 grams (5.6 oz)
Total run time: Up to 15 minutes (30 minutes with 18650 batteries)

Survival Laser V 405nm (Violet) Specifications
Part numbers: SL-VPB/PBAR
Wavelength: 405nm (violet)
Power output: 500mW +/- 50mW w/standard lens, 650mW +/- 50mW w/G-2 lens
Beam shape: Oval
Beam width: 5mm
Divergence: <1.5mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X CR123A or RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 440mA +/- 20mA
Lens: AR coated 3-element glass, focusable
Heat sink: Purple anodized aluminum
Duty cycle: 3 minute on/1 minute off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o batteries: 74 grams (2.6 oz)
Weight w/batteries: 107 grams (3.8 oz)
Total run time: Up to 2 hours per charge

Survival Laser R 660nm (Deep Red) Specifications
Part numbers: SL-RPB/PBAR
Wavelength: 660nm (red)
Power output: 300mW +/- 25mW w/standard lens
Beam shape: Round
Beam width: 5mm
Divergence: <1.5mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 1 X 18650 battery
Driver current: 510mA +/- 20mA
Lens: AR coated acrylic, focusable
Heat sink: Red anodized aluminum
Duty cycle: Continuous
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o battery: 74 grams (2.6 oz)
Weight w/battery: 107 grams (3.8 oz)
Total run time: Up to 3 hours per charge

Survival Laser RH 635nm (Bright Red) Specifications
Part numbers: SL-RHPB/PBAR
Wavelength: 635nm (red)
Power output: 450mW +/- 50mW w/standard lens
Beam shape: Line
Beam width: 5mm
Divergence: ~4mrad est. (at best focus)
Operating mode: CW (continuous wave)
Power source: 2 X CR123A or RCR123A batteries (2 X 18650 batteries with optional extension tube)
Driver current: 750mA +/- 10mA
Lens: AR coated acrylic, focusable
Heat sink: Red anodized aluminum
Duty cycle: 2 minute on/off
Working temperature: 0 deg. C - +30 deg. C
Storage temperature: -10 deg. C - +40 deg. C
Diameter: 1.02" (25.9mm)
Length: 4.79" (121.6mm)
Weight w/o battery: 74 grams (2.6 oz)
Weight w/battery: 107 grams (3.8 oz)
Total run time: Up to 2 hours per charge

PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Each Survival Laser diode & driver module is tested using a laser power meter and is certified to meet or exceed advertised output power level with specified and fully charged batteries once assembled as a complete functional laser device.

Survival Laser, Inc.
2113 W. 850 N.
Cedar City, UT 84721 USA

Email:
 sales@survivallaser.com
Web: http://www.survivallaser.com
Fax: (443) 222-0203

Our colored heatsinks and extended focus rings are protected by U.S. Patent no. US 686,097 S.

Visit us on Facebook
 for the latest Survival Laser information, photos, videos, customer comments, reviews and more!

Survival Laser
 
Pay with Stripe