DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS! No soldering required! This is a 445nm diode pressed into a standard diode module (copper module option available) and soldered to a 1.25A current regulated driver circuit that has been installed in a C6-style...

DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS! No soldering required!  This is a 405nm BDR-S06J 12X diode pressed into a standard diode module and soldered to a 445mA current regulated driver circuit that has been installed in a C6-style host "pill". Solder...

DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS MODULE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS! No soldering required!  This is a 660nm LPC-826 diode pressed into a standard diode module and soldered to a 520mA current regulated driver circuit that has been installed in a C6-style host "pill". Solder...

Eagle Pair® brand protective laser safety goggles for 190-540nm wavelength. These goggles have exceptional visible light transmission (rated at 50%) and yet protect to a level of OD 4+ (reduce the intensity of 190-540nm laser light by a factor of 10,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm blue, and...

MADE IN USA. Now includes our exclusive patent pending color anodized extended focusing ring in your choice of blue, red, violet, black or clear anodizing at no extra charge! This is the legendary "G-1" lens you may have heard about. These handmade single-element AR coated glass lens assemblies are significantly more efficient at light transmission...

Dual battery charger for rechargeable 3.7V RCR123A batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown. Caution: Do not recharge disposable batteries in this charger.

MADE IN USA. The battery extension tube allows the use of two "18650" Li-ion batteries with the Survival Laser S4 hosts for higher battery capacity, longer total run times and at full output power. This tube can also be used in other Aurora C6-style builds that normally use two CR123A or RCR123A batteries. However, DO NOT use this battery...

Dual battery charger for rechargeable 3.7V 18650 batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown.  Caution:  Do not recharge disposable batteries in this charger.

MADE IN USA. Céramique 2 is a high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks. This compound may be applied between the diode module and heat sink, and between the heat sink and the host body for improved heat transfer during operation and potentially longer duty...

Universal clamp mount and tripod for holding any object less than 1.5" (3.8cm) in diameter. Holds laser approximately 6-7" above surface. Tripod legs are flexible and can be bent to virtually any position. Universal clamp mount can be removed and attached to larger tripods, tripod base can also hold small digital cameras and telescopes. Metal...

Holster fits the Survival Laser and other Aurora C6-size hosts. Belt loop and 'D'-ring included.