»Blue Laser Part Bundles»Violet Laser Part Bundles»Red Laser Part Bundles»Host Assemblies»Diode and Driver Assemblies»Diodes»Diode Modules»Driver and Pill Assemblies»Diode Drivers»Heat Sinks»Lenses»Misc. Parts and Tools»Batteries and Chargers»Accessories»Safety»Tactical Flashlights»Flashlight Parts Bundles»Survival Laser Clothing
Related Products
12mm Diode Module & Focus..
This is a standard 12mm diameter laser diode module and lens focusing ring. Fits 5.6mm diameter diodes and 9mm lens assemblies. Nickel-plated brass construction.
$1.99
Copper Diode Module
MADE IN USA. This is a solid copper 12mm diameter diode module, precision machined to the same dimensions as "standard" nickel-plated brass modules, including our P/N SL-DMFR1. Fits 5.6mm diameter diodes and 9mm lens assemblies. The copper alloy used in this module has a thermal conductivity of 355 W/m-k which is over 3 times that of...
$9.99
DIY 445nm 1.25A Driver & ..
This product is identical to the driver module that is used in the P/N SL-LHA1 DIY 1-1.3W 445nm S4 Laser Host Assembly. The SL-DPM1 includes a 1.20-1.25A current regulated diode driver that has been soldered to a brass ring and pressed into a C6-style host "pill". Each assembly is tested before shipment. Module is packaged in an anti-static...
$29.99
Blue Anodized Aluminum He..
MADE IN USA. This product is a replacement for the blue anodized aluminum heat sink that is included with the Survival Laser I parts bundles. The SL-AHS2 is sized to fit a 12mm diameter standard diode module and includes a 3-48 set screw (installed) and a 0.050" Allen wrench. Also fits other Aurora C6 18650 hosts.
$14.99
Copper Heat Sink
MADE IN USA. This product is a higher-performance substitute for the aluminum heat sinks that are included with the Survival Laser and DIY Host Assemblies. The copper alloy used in this heat sink has a thermal conductivity of 355 W/m-k which is over 2.1 times that of aluminum, and will allow longer duty cycles without overheating the diode. The SL-CHS1...
$19.99
DIY 1-1.3W 445nm S4 Host ..
A do-it-yourself (DIY) S4™ host assembly which includes the body (retaining ring, heat sink holder, battery holder and tailcap switch), a 1.25A diode driver circuit preinstalled in the "pill", choice of unanodized aluminum or copper heat sink with set screw, 0.050" Allen wrench and lens cap. Add your own diode, diode module...
$56.99
445nm AR Coated Standard ..
This 9mm diameter 445nm AR coated glass lens assembly fits standard 12mm diode modules. This fully-threaded lens is coated specifically for the 445nm wavelength and will provide a slight increase in laser light output over other lenses that are coated for a wavelength range of 405-445nm.
$6.49
G-1 Lens Assembly
MADE IN USA. Now includes our exclusive patent pending color anodized extended focusing ring in your choice of blue, red, violet, black or clear anodizing at no extra charge! This is the legendary "G-1" lens you may have heard about. These handmade single-element AR coated glass lens assemblies are significantly more efficient at light transmission...
$99.49
18650 Battery Charger
Dual battery charger for rechargeable 3.7V 18650 batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown. Caution: Do not recharge disposable batteries in this charger.
$14.99
Survival Laser Holster
Holster fits the Survival Laser and other Aurora C6-size hosts. Belt loop and 'D'-ring included.
$5.99
RCR123A Battery Charger
Dual battery charger for rechargeable 3.7V RCR123A batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown. Caution: Do not recharge disposable batteries in this charger.
$14.99
External Lens Spring
MADE IN USA. This must-have accessory is a stainless steel spring that goes around the outside of a standard lens housing and keeps the lens under tension against the diode module for more precise focusing. Easy to adjust and holds the lens position better than Teflon tape, which needs to be replaced periodically. This spring is sized for standard...
$5.79
Eagle Pair® 190-540nm Sta..
Eagle Pair® brand protective laser safety goggles for 190-540nm wavelength. These goggles have exceptional visible light transmission (rated at 50%) and yet protect to a level of OD 4+ (reduce the intensity of 190-540nm laser light by a factor of 10,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm blue, and...
$41.99
Battery Extension Tube- B..
MADE IN USA. The battery extension tube allows the use of two "18650" Li-ion batteries with the Survival Laser S4 hosts for higher battery capacity, longer total run times and at full output power. This tube can also be used in other Aurora C6-style builds that normally use two CR123A or RCR123A batteries. However, DO NOT use this battery...
$19.99
Eagle Pair® 190-540nm Sli..
Eagle Pair® brand protective laser safety goggles for 190-540nm wavelength, in a "slip over" frame style for individuals who wear corrective glasses. These goggles have exceptional visible light transmission (rated at 50%) and yet protect to a level of OD 4+ (reduce the intensity of 190-540nm laser light by a factor of 10,000 or more),...
$41.99
Céramique 2 Thermal Compo..
MADE IN USA. Céramique 2 is a high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks. This compound may be applied between the diode module and heat sink, and between the heat sink and the host body for improved heat transfer during operation and potentially longer duty...
$4.99
Eagle Pair® 190-540nm & 9..
Eagle Pair® brand protective laser safety goggles for combined 190-540nm & 900-1700nm wavelengths. These goggles have 30% visible light transmission, protect to a level of OD 4+ (reduce the intensity of 190-540nm and 900-1700nm laser light by a factor of 10,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm...
$47.99
Eagle Pair® 190-470nm & 6..
Update: Based on our testing with the recently-introduced high-power 635nm red diodes, these goggles appear to have an OD of approximately 2.5 at the 635nm wavelength. Eagle Pair® brand protective laser safety goggles for combined 190-470nm & 660-760nm wavelengths. These goggles have 40% visible light transmission, protect to a level...
$41.99
Clamp Mount & Tripod
Universal clamp mount and tripod for holding any object less than 1.5" (3.8cm) in diameter. Holds laser approximately 6-7" above surface. Tripod legs are flexible and can be bent to virtually any position. Universal clamp mount can be removed and attached to larger tripods, tripod base can also hold small digital cameras and telescopes. Metal...
$9.99
Extended Length Focusing ..
MADE IN USA. The extended length focusing ring is precision-machined from aircraft grade aluminum and is designed to fit standard 9mm diameter lens assemblies. It is nearly 1/2" long with a knurled outer surface and allows easier focusing without burning your fingers. The outside diameter is sized to fit commonly-used protective lens caps. A...
$17.99
Silicone Lens Cap
A glow-in-the-dark (GITD) green silicone rubber lens cap identical to the lens caps shipped with the Survival Laser parts bundles. May also be used to replace the black tailcap switch cover.
$0.49
Universal Warning Label
A universal self-adhesive warning label that can be used with devices of virtually any wavelength and output power. Dimensions approximately 30x24mm.
$0.49
Eagle Pair® 190-540nm & 8..
Eagle Pair® brand protective laser safety goggles for combined 190-540nm & 800-2000nm wavelengths. These goggles have 20% visible light transmission, protect to a level of OD 4+ (reduce the intensity of 190-540nm and 800-2000nm laser light by a factor of 10,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm...
$57.99
Customer Reviews
No Reviews Posted Yet - be the first!(write review)
