»Blue Laser Part Bundles»Violet Laser Part Bundles»Red Laser Part Bundles»Host Assemblies»Diode and Driver Assemblies»Diodes»Diode Modules»Driver and Pill Assemblies»Diode Drivers»Heat Sinks»Lenses»Misc. Parts and Tools»Batteries and Chargers»Accessories»Safety»Tactical Flashlights»Flashlight Parts Bundles»Survival Laser Clothing
Related Products
DIY 405nm Diode, Module a..
DANGER: APPROPRIATE LASER SAFETY GOGGLES MUST BE WORN WHEN OPERATING THIS DIODE! RISK OF INSTANTANEOUS SEVERE EYE DAMAGE OR BLINDNESS! This is a 405nm BDR-S06J 12X diode pressed into a standard diode module and includes a standard focusing ring (extended focusing ring optional). Typical output power is 500 +/- 50mW with a standard 3-element AR...
$69.99
Violet Anodized Aluminum ..
MADE IN USA. This product is a replacement for the violet anodized aluminum heat sink that is included with the Survival Laser V parts bundles. The SL-AHS3 is sized to fit a 12mm diameter standard diode module and includes a 3-48 set screw (installed) and a 0.050" Allen wrench. Also fits other Aurora C6 18650 hosts.
$14.99
445nm AR Coated Standard ..
This 9mm diameter 445nm AR coated glass lens assembly fits standard 12mm diode modules. This fully-threaded lens is coated specifically for the 445nm wavelength and will provide a slight increase in laser light output over other lenses that are coated for a wavelength range of 405-445nm.
$6.49
G-1 Lens Assembly
MADE IN USA. Now includes our exclusive patent pending color anodized extended focusing ring in your choice of blue, red, violet, black or clear anodizing at no extra charge! This is the legendary "G-1" lens you may have heard about. These handmade single-element AR coated glass lens assemblies are significantly more efficient at light transmission...
$99.49
18650 Battery Charger
Dual battery charger for rechargeable 3.7V 18650 batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown. Caution: Do not recharge disposable batteries in this charger.
$14.99
RCR123A Battery Charger
Dual battery charger for rechargeable 3.7V RCR123A batteries, with convenient flip-out wall plug built-in. Charger appearance may be slightly different than that shown. Caution: Do not recharge disposable batteries in this charger.
$14.99
Battery Extension Tube- B..
MADE IN USA. The battery extension tube allows the use of two "18650" Li-ion batteries with the Survival Laser S4 hosts for higher battery capacity, longer total run times and at full output power. This tube can also be used in other Aurora C6-style builds that normally use two CR123A or RCR123A batteries. However, DO NOT use this battery...
$19.99
Extended Length Focusing ..
MADE IN USA. The extended length focusing ring is precision-machined from aircraft grade aluminum and is designed to fit standard 9mm diameter lens assemblies. It is nearly 1/2" long with a knurled outer surface and allows easier focusing without burning your fingers. The outside diameter is sized to fit commonly-used protective lens caps....
$17.99
External Lens Spring
MADE IN USA. This must-have accessory is a stainless steel spring that goes around the outside of a standard lens housing and keeps the lens under tension against the diode module for more precise focusing. Easy to adjust and holds the lens position better than Teflon tape, which needs to be replaced periodically. This spring is sized for standard...
$5.79
Clamp Mount & Tripod
Universal clamp mount and tripod for holding any object less than 1.5" (3.8cm) in diameter. Holds laser approximately 6-7" above surface. Tripod legs are flexible and can be bent to virtually any position. Universal clamp mount can be removed and attached to larger tripods, tripod base can also hold small digital cameras and telescopes. Metal...
$9.99
Survival Laser Holster
Holster fits the Survival Laser and other Aurora C6-size hosts. Belt loop and 'D'-ring included.
$5.99
Eagle Pair® 190-540nm Sta..
Eagle Pair® brand protective laser safety goggles for 190-540nm wavelength. These goggles have exceptional visible light transmission (rated at 50%) and yet protect to a level of OD 4+ (reduce the intensity of 190-540nm laser light by a factor of 10,000 or more), and are CE certified. They are suitable for use with 405nm violet, 445nm blue, and...
$41.99
DIY Stainless Steel Host ..
This is an unmarked, brushed finish stainless steel host assembly that includes the body (retaining ring, heat sink holder, battery holder and tail cap with "clicky" switch and wrist strap), driver pill, brass ring, a new extended and tapered copper heat sink with set screw and a 0.050" Allen wrench. The heat sink is machined to fit a...
$49.99
DIY C6 Host Assembly
A do-it-yourself (DIY) aluminum C6 host assembly that includes the retaining ring, heat sink holder, battery holder and tailcap switch, pill and brass ring. Does not include a heat sink, diode, diode driver, diode module, lens or other components. Accepts 2 X RCR123A, CR123A or 1 X 18650 batteries depending on diode and driver used. The C6 host...
$15.99
Customer Reviews
1 review(s) posted (write review)
Excellent Driver! - Fiddy - 31/10/2011 09:13:04
Excellent Driver!Threads into the host nicely, uses that 26AWG silicon wire which is the best wire to work with, so flexible!Having the current & color it was designed for written on the driver pill is a great idea.My build produced 541mW with a 3 Element Glass lens which is outstanding, almost over spec than the "500mW +/- 50mW" they claim.Will not be disappoint!
Excellent Driver! - Fiddy - 31/10/2011 09:13:04
Excellent Driver!Threads into the host nicely, uses that 26AWG silicon wire which is the best wire to work with, so flexible!Having the current & color it was designed for written on the driver pill is a great idea.My build produced 541mW with a 3 Element Glass lens which is outstanding, almost over spec than the "500mW +/- 50mW" they claim.Will not be disappoint!
